8960 FORD B50 1/10 Scale 4WD RTR Monster Truck MT-Series

$329.00

cen-racing-8960-ford-b50-1-10-scale-4wd-rtr-monster-truck-mt-series-28494748024909
cen-racing-8960-ford-b50-1-10-scale-4wd-rtr-monster-truck-mt-series-28636561571917
cen-racing-8960-ford-b50-1-10-scale-4wd-rtr-monster-truck-mt-series-28636561309773
cen-racing-8960-ford-b50-1-10-scale-4wd-rtr-monster-truck-mt-series-28636561277005
cen-racing-8960-ford-b50-1-10-scale-4wd-rtr-monster-truck-mt-series-28636561178701
cen-racing-8960-ford-b50-1-10-scale-4wd-rtr-monster-truck-mt-series-28494715256909
cen-racing-8960-ford-b50-1-10-scale-4wd-rtr-monster-truck-mt-series-28636561080397

Related products

  • (573) 381-2592
  • info@usedrcexchange.com
  • Harrisonville MO

Product Description

This is the CEN Racing FORD B50 4WD 1/10 Scale Ford RTR Monster Truck. Based on a real truck, this is an officially licensed 1979 Ford F600 crew cab front end with a 1979 Bronco rear bed! The headlights and light bar have built in buckets, and are 3mm LED ready! Wheelie bar included. Hobbywing 40A waterproof ESC & Savox servo are standard. A realistic full roof rack and side mirrors are some of the awesome details and killer innovations.

ESC -40A WP-1040-Brushed (Powered by HOBBYWING):
  • Water-proof and dust-proof for all weather
  • Built-In Capacitor Module
  • Automatic throttle range calibration
  • Low voltage cut-off protection for Li-Po (lithium polymer) and NiMH battery
  • Over-Heat protection and throttle signal loss protection
  • Easily programmed with jumpers
Motor -RS-550 High Torque Motor (Powered) By Mabuchi Motor Servo -12Kg Servo (O.E.M. by Savox):
  • 4.8V 0.26 sec/60deg, 10.0 kg-cm
  • 6.0V 0.23 sec/60deg, 12.0 kg-cm
  • 25T Horn Gear Spline
Radio System - Pistol-Grip Mod-3S 3 Channel Transmitter:
  • Digital Trimming
  • Steering Dual-Rate (ST D/R) Adjustment
  • End Point Adjustment (EPA)
  • Build in Failsafe
  • Power Alarm Transmitter Model #: 82190 Frequencies: 2.4GHz
Chassis:
  • DVP (Dual Vertical Plate) Chassis Design
  • Sealed Receiver Compartment
  • Easy Access/Quick Release Battery Tray
  • Battery Tray Size 146x50x25mm
  • Adjustable Wheelie Bar Ready (w/Ball Bearing)
  • Full Precision Ball Bearing Support
  • Adjustable Turnbuckles -Harden Steel Steering Drag Link
  • Fully Equipped with Allen Hex Screws
  • Adjustable Body Post
  • High Torque Servo Saver
  • Optional 4-Wheel Steering Design
Suspension:
  • Sway Bar and Wheelie Bar Included
  • 8 Big Bore Oil Filled Coil Over Shocks
  • Aluminum Anodized Shock Caps -10mm over size shock body with 3mm hardened steel polished shaft
  • Stiff Hard Racing Spring
  • Fixed Wheelbase Ride Height Adjustable with pre-load
  • Realistic 4-Link Suspension design
Drivetrain:
  • Slipper Drive System
  • 4 Wheel Drive
  • Center Shaft Drive Train for more power transferred to the wheels
  • Hight Efficient Transmission System
  • Wide Range Easy Changeable Gear Box Design
  • Sealed transmission eliminates dirt and dust substances to get in
  • Sealed Axle housing
  • 5mm Hardened Steel Axle shaft
  • Differential Center Locker Front/Rear Planetary Gear Type
  • Ring & Pinion 30/15T
 
Length: 16inch (405mm) Width: 12.20inch (310mm) Wheelbase: 10.82inch (275mm) Ground Clearance: 3.14inch (80mm) Weight: 4.85 lb. 2.2kg Deep Dish 2.2-inch (55mm) Monster Truck Wheels, V-Pattern Tire 55x136x74mm

Usedrcexchange – The Best Place for Affordable RC Cars & Parts!

Get Started

Quick Links

Home

About-Us

Testimonials

Terms and Conditions

Contact

FAQ's

Our Products

HabbyPlus Rock Crawlers

HPI racing Rock Crawlers

Monster Trucks

CEN Racing Monster Trucks

Associated Drift

You have been successfully Subscribed! Ops! Something went wrong, please try again.

Copyright © 2025, usedrcexchange. All rights reserved.